IP40. Üla- ja allvalgustusega, lõputute erilahendustega alumiiniumist profiilvalgustid.

Suspended middle profile LED luminaire for in-line connection without gaps
Light distribution type: Direct/indirect (60/40)
Optical system: opal polycarbanate diffuser
LED lifetime, h 100000/L80B50
Housing: aluminium
Colour: light grey (RAL9006)

Available options:
T830 Colour temperature 3000K, CRI 80+
T840 Colour temperature 4000K, CRI 80+
OP Opal diffuser with high light transmittance
DPRZ LT80 De-glaring micro-prismatic diffuser with matt light scattering layer
LG3 Luminaire fits to LG3 requirements (with direct/indirect light distribution)
LO1 Light output level 1
LO2 Light output level 2
LO3 Light output level 3
DALI Driver with DALI interface and switch-control dimming
*note – for DALI LIN option wires are 2×0.5mm2
EAIRB Integrated smart sensor and driver with wireless communication and grouping possibilities for lighting control
*note – ingress protection IP20
TW Integrated light source and driver for Tuneable white control 2700-6500 K
*note – For options EAIRB, ACT+ luminaire housing is 65mm longer
*note – the EAIRB and ACT+ sensors are positioned in the end of the luminaire for lengths up to 1800mm, and in the middle of the luminaire for lengths over 1800mm
PULL Pull switch device, on/off
PULLDIM Pull switch device and driver with switch-control dimming
*note – For PULL and PULLDIM options luminaire housing is 50mm longer and switch is positioned at the end of luminaire
EM3 Emergency version 3 hours
EM3B Emergency version 3 hours (best available technology)
EM3A Emergency version equipped with an autonomous testing system, 3 hours
EM3D Emergency version 3 hours with DALI interface
*note – EM options applicable for models longer than 1000mm
*note – Operating temperature range for Luminaires with EM option, C: ta 0… +35
5TB 5-pole terminal block in middle of luminaire for easy through wiring
*note – 5TB option is included as standard
1LIN Through wiring 3×1.5 mm² with two push-in terminal blocks
3LIN Through wiring 5×1.5 mm² with two push-in terminal blocks
2G Strain relief for power supply cable, 2pcs
CBF3-2.0m clear Cable 3×0.75mm² for suspended luminaire up to 2.0 meters, transparent
L for in-line connection end/first luminaire (lengths: 1128/ 1408mm)
LL for in-line connection intermediate luminaire (lengths: 1121/ 1401mm)
*note – for L and LL models joint kit and 1LIN option included (5TB option for lengths up to 800mm)
SUS Suspended version
*note – for suspended luminaires it is recommended to use one of CBF3 option for easier mounting
RAL RAL colour
*note – price for uncommon RAL colour or quantity less then MOQ could be different from indicated. Ask before placing an order